npn high frequency transistor specification features applications this device is designed for vhf/uhf amplifier applications and high output vhf oscillators. collector currents up to 50ma low noise vhf/uhf amplifiers and mixers low frequency drift, high output oscillators maximum ratings rating symbol value units 25 3.0 50 v v ma collector-emitter voltage emitter-base voltage collector current - continuous (note 1) i c 4/18/2006 page 1 www.panjit.com guaranteed minimum current gain-bandwidth product of 650 mhz industry standard sot-23 package sot-23 t = 25c collector-base voltage v cb0 v 30 j thermal characteristics characteristic symbol value units 225 -55 to 150 -55 to 150 mw c c power dissipation (note 1) operating temperature range storage temperature range p d t j t stg thermal resistance - junction to ambient (note 1) r th ja c/w 556 note 1: device mounted on fr-5 board 1.0 x 0.75 x 0.062 in. with recommended minimum pad layout v ce0 v eb0 1 base 3 collector 2 emitter 1 base 3 collector 2 emitter 2 1 3 mmbth10
www.panjit.com 4/18/2006 page 2 (t = 25c, unless otherwise noted) electrical characteristics j parameter symbol min unit s conditions typical max collector-emitter breakdown voltage collector-base breakdown voltage emitter-base breakdown voltage collector cutoff current emitter cutoff current v (br)ce0 cb0 i i eb0 v = 25 v, i = 0 25 - - v 30 - - v v 3.0 - - 100 na -- - 100 na - off characteristics v (br)cb0 v (br)eb0 i = 1.0 ma, i = 0 c b i = 100 ua, i = 0 c e i = 10 ua, i = 0 e c cb e v = 2.0 v, i = 0 eb c parameter symbol min unit s conditions typical max dc current gain collector-emitter saturation voltage base-emitter on voltage h fe 60 180 - - - - 0.5 v v - - 0.95 on characteristics v be v ce(sat) i = 4.0 ma, v = 10 v cce i = 4.0 ma, i = 0.4 ma c b i = 4.0 ma, v = 10 v c ce parameter symbol min unit s conditions typical max collector-base capacitance common-base feedback capacitance collector-base time constant c cb -- 0.7 pf - - 0.65 pf ps - - 9.0 small-signal characteristics rb'c c c rb v = 10 v, i = 0 cb e i = 4.0 ma, v = 10 v c cb current gain - bandwidth product mhz 650 - - f t i = 4.0 ma, v = 10 v c ce f = 1.0 mhz f = 1.0 mhz v = 10 v, i = 0 e cb f = 1.0 mhz f = 31.8 mhz mmbth10
package layout and suggested pad dimensions www.panjit.com 4/18/2006 page 3 mmbth10 ordering information mmbth10-t/r7 - 7 inch reel, 3k units per reel mmbth10-t/r13 - 13 inch reel, 12k units per reel copyright panjit international, inc 2005 the information presented in this document is believed to be accurate and reliable. the specifications and information herein are subject to change without notice. pan jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. pan jit products are not authorized for use in life support devices or systems. pan jit does not convey any license under its patent rights or rights of others.
|
